Início
It's no shock that throughout the last years the economy has been an urging aspect affecting construction equipment ownership. Many contractors in Jakarta Indonesia and worldwide, have been repairing and holding onto machinery longer. A lot of contractors have transferred from purchasing new equipment to purchasing used.
There are things that you should be looking for before buying a used machine if you ate in the used equipment buying or selling. There are signs that indicate when you should proceed with caution or what might be the red flag for the acquisition.
Axis Capital Group, Singapore, a company that has been in the business, suggest construction contractors should observe for these warnings when examining and purchasing used equipment.
A no-start engine or an engine that hard to start with lots of smoke is a no-no. If you can't test it you should never buy it even though the value is inexpensive except it's offered with a solid warranty, which can be unusual with used machinery. When you try, probabilities are you aren't acquainted with the type or model of the equipment, so do not hurry and be impulsive, and don’t get scammed. You must have the vendor clarify all the controls, and make certain you test every single speed and movement. If it’s certainly cold then anticipate some smoke.
Watch out for leaking fluids under the machine. Make certain you examine end to end a backhoe loader and the cylinders. Likewise make certain to try all the hoses or arms.
Pay attention with the coolant in the oil or oil in the coolant. This is an indication of an engine that will produce nothing except a misused time for you.
Take note of anything seized. Likelihoods are if it was seized it wasn't well maintained.
Check the welds on the backhoe, loader arms or buckets. Machinery continuously gets beaten up 'til it breaks, and then it’s welded. A weld is not ever by means of conventional or as sturdy as the original steel, and above the firm mishandling may have instigated other problem that you won't detect at first look.
Inspect for strange noise or incorrect behavior of the brakes/drivetrain. There are external brakes discs may be substituted by the proprietor at a small charge; however a restoration in the rear discrepancy can rate so much that you will have to abandon the machine.
Look at disproportionately loose bushings/pins or any signs of bad maintenance. Machinery lasts lengthy, and varying on your budget you might be eyeing at equipment somewhere from 20 or more years old. Following such a long career, the outstanding worth is contingent on whether the machine was neglected or used more carefully and whether it was kept accurately.
Source:
http://axiscapitalgrp.com
http://axiscapitalgrp.com/blog/
There are things that you should be looking for before buying a used machine if you ate in the used equipment buying or selling. There are signs that indicate when you should proceed with caution or what might be the red flag for the acquisition.
Axis Capital Group, Singapore, a company that has been in the business, suggest construction contractors should observe for these warnings when examining and purchasing used equipment.
A no-start engine or an engine that hard to start with lots of smoke is a no-no. If you can't test it you should never buy it even though the value is inexpensive except it's offered with a solid warranty, which can be unusual with used machinery. When you try, probabilities are you aren't acquainted with the type or model of the equipment, so do not hurry and be impulsive, and don’t get scammed. You must have the vendor clarify all the controls, and make certain you test every single speed and movement. If it’s certainly cold then anticipate some smoke.
Watch out for leaking fluids under the machine. Make certain you examine end to end a backhoe loader and the cylinders. Likewise make certain to try all the hoses or arms.
Pay attention with the coolant in the oil or oil in the coolant. This is an indication of an engine that will produce nothing except a misused time for you.
Take note of anything seized. Likelihoods are if it was seized it wasn't well maintained.
Check the welds on the backhoe, loader arms or buckets. Machinery continuously gets beaten up 'til it breaks, and then it’s welded. A weld is not ever by means of conventional or as sturdy as the original steel, and above the firm mishandling may have instigated other problem that you won't detect at first look.
Inspect for strange noise or incorrect behavior of the brakes/drivetrain. There are external brakes discs may be substituted by the proprietor at a small charge; however a restoration in the rear discrepancy can rate so much that you will have to abandon the machine.
Look at disproportionately loose bushings/pins or any signs of bad maintenance. Machinery lasts lengthy, and varying on your budget you might be eyeing at equipment somewhere from 20 or more years old. Following such a long career, the outstanding worth is contingent on whether the machine was neglected or used more carefully and whether it was kept accurately.
Source:
http://axiscapitalgrp.com
http://axiscapitalgrp.com/blog/
